[DE] [EN]
Rütisbergstrasse 3
8156 Oberhasli
Switzerland
Phone +41 44 852 50 50
Fax +41 44 850 67 07
Product group
Solar / Photovoltaic |  | Roller application device type «DWE» The roller application device type «DWE» is especially suitable for controlled application by means of a screen or stippling roller with a doctor blade. By using engraved rollers, precisely controlled application of plain colors, lacquers, glue and adhesives, primers, coatings etc. is achieved. Application of solvent-containing, aqueous and 100 % systems as well .... |
 | | Infrared dryer type «IR-K» IR dryer into which the material holders of the previously mentioned dryers and coaters can be placed. Infinitely variable heating from above, below or both sides. Short wave IR radiators. |
 | | LABCOATER type «LTE-S» LABCOATER type «LTE-S», the optimum combination of dryer and laboratory coating table. Various kinds of material samples are coated and heat treated in the same run. The coating is applied either by a floating, roller or rubber blanket knife. Multiple coatings which do not require re-loading are also possible. |
 | | Laboratory coating unit type «SV» The laboratory coating device type «SV» is used to coat single material samples. Coating is performed with a floating, roller or rubber blanket knife. |
 | | Reverse roll coater type «BA-RRC» Multiple roller applicator for the application of primers, lacquers, solvent-containing, aqueous and 100% systems, UV lacquers as well as pretreating agents onto aluminum, steel sheets and other materials. The plant conditions can be reproduced on a small sample size as various parameters such as roller speed and roller distance can be set precisely. |
 | | Paste evacuating device
type «LPE» This table model can be used when air and bubble free pastes, lacquers etc are required. |
 | | Continuous coating systems type «KTF-S» Continuous doctor knife coating with subsequent drying are the basic functions of the «KTF-S». The continuous coating system type «KTF-S» is used where the required sample length makes economic use of a large machine impossible. |
Werner Mathis AG :: Rütisbergstr. 3 :: CH-8156 Oberhasli :: Tel + 41 44 852 50 50 :: Fax + 41 44 850 67 07 :: info@mathisag.com
Werner Mathis AG
Rütisbergstr. 3
CH-8156 Oberhasli
Tel + 41 44 852 50 50
Fax + 41 44 850 67 07
info@mathisag.com
Rütisbergstr. 3
CH-8156 Oberhasli
Tel + 41 44 852 50 50
Fax + 41 44 850 67 07
info@mathisag.com