[DE] [EN]
Rütisbergstrasse 3
8156 Oberhasli
Switzerland
Phone +41 44 852 50 50
Fax +41 44 850 67 07
Product group
MATHIS AG » Products » Coating » Continuous |  | Continuous coating systems type «KTF-S» Continuous doctor knife coating with subsequent drying are the basic functions of the «KTF-S». The continuous coating system type «KTF-S» is used where the required sample length makes economic use of a large machine impossible. |
 | | Foil coating Range for the painting industry type BA 20712 A coloured base coat and clear coat are applied to foil and pre-dried. This coating is only around one millimeter thick. Covered by a transparent protective coating, it can be cut to size and applied in large or small-scale production runs at almost any location. Here, the foil is deep-drawn into the final shape, cured with UV light and back-foamed to the completed c .... |
 | | Coating of anodes and cathodes for the manufacturing of Batteries Mathis AG has developed an R&D range specifically for the coating of anodes and cathodes. The multifunctional coating head is designed for various coating processes like slot die, doctor knife coating and more. The coating head allows for position settings from 8 to 12 o’clock. The gap adjustment is possible either by hand or automatically. Wet and dry weight me .... |
 | | Coil coating system type «BA 15706» Coil coating system for coating and drying steel and aluminum coils. The application material, in this case lacquers of different colors, is applied to one or both sides of an aluminum coil with the «reverse roll coating» process. In two-shift operation up to 38,000 meters of aluminum coil are coated daily. |
 | | Production of battery components, type «BA 16006» The application material is applied to a metal or plastic foil or paper in a reverse roll coating process or as a doctor knife coating. The coated web feed runs through various drying stages and is subsequently wound up. |
 | | Coating system type «BA 16106» Coating system for production of transdermal systems - TTS plasters. The application material, a homogenous solution of active substance and adhesive, is continuously applied to a substrate foil with a slot die. The coated foil runs though a four-zone dryer in which the solvent is thermally removed from the active substance and adhesive solution. The finished laminat .... |
Werner Mathis AG :: Rütisbergstr. 3 :: CH-8156 Oberhasli :: Tel + 41 44 852 50 50 :: Fax + 41 44 850 67 07 :: info@mathisag.com
Werner Mathis AG
Rütisbergstr. 3
CH-8156 Oberhasli
Tel + 41 44 852 50 50
Fax + 41 44 850 67 07
info@mathisag.com
Rütisbergstr. 3
CH-8156 Oberhasli
Tel + 41 44 852 50 50
Fax + 41 44 850 67 07
info@mathisag.com